Can iPhones Really Work as RFID Scanners?
725Discover why most iPhones can't scan RFID tags natively. See how Cykeo's Bluetooth adapter turns your iPhone into a real RFID scanner for inventory & access control.
MoreAll RFID Product
Radio frequency identification (RFID) technology identifies and tracks tagged objects using radio waves. An RFID system typically includes a tag, a reader, and an antenna; the reader captures the tag’s electronic information and sends it to software, allowing businesses to identify products, manage assets, and monitor movement without relying on direct visual scanning.
Radio frequency identification, commonly abbreviated as RFID, is a wireless identification technology. It uses radio-frequency signals to exchange information between an RFID tag and a reader. Unlike a conventional barcode scanner, an RFID reader does not generally need to see a printed code or point directly at each item.
The term describes a method of identification, not one specific device. An RFID system may be as small as a desktop reader used to encode tags, or as extensive as a network of fixed readers installed at warehouse doors, production lines, and distribution points.
An RFID tag usually contains a microchip and an antenna. The chip stores identification data, while the antenna enables communication with the reader. Depending on the tag type, it may obtain operating energy from the reader’s radio field or use an internal battery.
A reader sends out a radio-frequency signal and listens for responses from compatible tags. It then decodes the information and transfers it to a connected application. That application can associate the tag’s identifier with a product record, equipment number, shipment, or other business information.
An important distinction: RFID does not automatically tell a company everything about an object. A basic tag may provide only an identifier. The business software looks up that identifier and determines what the object is, where it belongs, and what action should follow.
The practical operation of RFID is a radio communication process. The reader and tag must use compatible frequencies and protocols, and the surrounding environment must allow the signal to travel effectively.
In passive UHF RFID, the tag commonly communicates by changing how it reflects the reader’s signal. This technique is called backscatter. The tag does not need to generate its own continuous radio transmission in the way an active tag does.
GS1 describes the RFID interaction as communication between an interrogator (reader) and a transponder (tag). Its technical guidance also explains that passive tags draw energy from the reader’s field, while active tags have their own power source and radio transmitter.
This is where RFID differs from the simple idea of a reader communicating with one tag at a time.
In warehouse and retail applications, dozens or hundreds of tags may be within the reader’s field. UHF RFID systems use anti-collision procedures to manage tag responses and identify multiple tags during an inventory round. The reader does not simply receive every response at exactly the same moment; the protocol coordinates communication so that tags can be identified.
That capability makes RFID useful for bulk identification. A worker may be able to read a group of tagged cartons without scanning each barcode individually. But the number of tags successfully identified in a real installation depends on tag sensitivity, reader configuration, antenna placement, RF interference, packaging, and how quickly the goods move.
RFID systems are commonly classified in two ways: by how the tag receives power and by the radio frequency the system uses. These are different classification methods. A passive UHF tag, for example, is both passive by power source and UHF by operating frequency.
A passive RFID tag has no battery for normal operation. It receives energy from the electromagnetic field generated by the reader and uses that energy to respond. Passive tags are widely used for product labels, retail inventory, library materials, and logistics because they can be manufactured in compact formats and do not require a battery replacement program.
An active RFID tag has its own power source, usually a battery, and uses a transmitter to send signals. Active systems are suitable for applications that need longer communication distances or regular location-related updates, such as tracking certain vehicles, containers, or high-value assets.
Battery-assisted passive (BAP) tags use a battery to support the chip or onboard sensors, but communicate with the reader through backscatter rather than transmitting like a conventional active tag. This distinction is important when comparing product specifications: a battery does not automatically make a tag an active RFID tag.
GS1 distinguishes these three categories by their power and communication methods. Passive tags use the reader’s field, active tags transmit using their own power source, and BAP tags combine battery assistance with backscatter communication.
The operating frequency affects how a system behaves around different materials, how far it can read, and which applications it is suited to.
| RFID frequency | Common operating frequency | Typical characteristics | Common uses |
|---|---|---|---|
| LF (Low Frequency) | 125–134 kHz | Short reading distance; relatively less sensitive to some radio-frequency interference | Animal identification, access applications |
| HF (High Frequency) | 13.56 MHz | Short-range communication; widely used for cards and item-level applications | Contactless cards, ticketing, library applications |
| UHF (Ultra-High Frequency) | Approximately 860–930 MHz, depending on region and standard | Supports longer-range and multi-tag identification | Retail, warehousing, logistics, industrial inventory |
GS1 describes LF RFID as typically operating at 125 or 134 kHz, HF at 13.56 MHz, and passive UHF RFID within the 860–930 MHz range. Its frequency guidance notes that UHF read distances can reach up to 10 metres depending on the environment. These figures are reference characteristics, not promises for every tag or installation.
The distinction becomes clear in practical use. An HF card reader designed for a person to present one card at close range is not interchangeable with a UHF reader designed to identify tagged cartons moving through a warehouse portal. The frequency, antenna, tag design, and communication protocol must match the task.
A complete RFID installation is more than a reader and a collection of tags. Its components need to work together, and the software layer is what makes the collected identifiers useful to a business.
The tag is attached to, embedded in, or carried by the object being identified. A typical passive tag contains:
Tags are available as paper labels, plastic cards, rugged hard tags, textile tags, and designs made for metal surfaces. The physical format should be chosen according to the object, environment, and expected service life.
The reader controls communication with tags and converts their responses into digital data. Antennas transmit the reader’s signal and receive tag responses. Some devices combine the reader and antenna in one enclosure; others use a separate reader connected to multiple antennas.
A fixed rfid reader may be installed at a loading dock or production station. A handheld reader is more suitable when an employee needs to move through a storage area and locate specific items. A desktop reader-writer is commonly used at a workstation for tag registration or encoding.
Reader output is not the same as a completed business transaction. Software must decide what a detected identifier means.
For example, when a tagged carton passes a receiving point, the system may compare its EPC with an expected shipment list. If the identifier is recognized and the shipment is valid, the warehouse application can record the receipt. If the identifier is unknown, duplicated, or associated with another shipment, the system needs an exception-handling rule.
This is one of the most overlooked parts of RFID planning. A technically successful read does not guarantee accurate inventory records. Tag registration, database quality, event filtering, and workflow rules all matter.

RFID is useful when an organization needs to identify objects repeatedly, capture multiple identifiers, or record movement at defined points. The technology is not limited to warehouses, although inventory management is one of its best-known applications.
Retailers can use RFID labels to identify individual products during receiving, replenishment, stocktaking, and sales-floor operations. Instead of scanning every barcode individually, staff can use a compatible reader to capture multiple tagged items within a reading zone.
Research published in Production and Operations Management examined RFID-enabled inventory visibility in retail stores. In its first field experiment, the researchers studied 13 stores over 23 weeks and reported an approximately 26% reduction in inventory record inaccuracy. The second experiment covered 62 stores and five product categories; the results varied by category, from no statistically significant improvement to an 81% reduction. The important point is not that every retailer should expect a 26% gain. It is that RFID’s value depends on the product category and how the resulting data is used in inventory processes.
In distribution centres, RFID can support carton identification, pallet tracking, shipment verification, and movement recording. Fixed readers can be installed at receiving or dispatch points, while handheld readers can help staff locate tagged inventory.
The reading zone needs careful design. If a portal reads products from a neighbouring storage area, the system may associate an item with the wrong movement event. More reader power is not always the answer; antenna direction, tag position, shielding, and software filtering may be more effective.
Manufacturers can attach RFID tags to products, containers, tools, or work-in-progress carriers. Readers installed at selected production stages can record when an item reaches a workstation or passes a process checkpoint.
This can provide a more consistent identification record, provided that the tag can withstand the environment and the software associates each read with the correct production step.
Libraries use RFID for item identification, circulation, returns, and stock management. Healthcare organizations may use RFID to identify equipment, manage supplies, or support asset visibility. The FDA describes RFID as a wireless system using tags and readers, and notes that readers may be handheld or installed in fixed locations or built into cabinets and rooms.
In all these settings, RFID should be selected according to the actual identification task. A system intended to track medical equipment across rooms has different requirements from a library self-service station or a high-volume warehouse portal.
RFID offers practical advantages, but it is not a universal replacement for barcodes or other identification methods. Its value depends on the type of object, the reading environment, the number of items being processed, and the accuracy required by the business process.
Metal and liquid can affect performance. Metal surfaces can detune or alter the behaviour of an RFID tag antenna. Liquids can absorb or affect UHF radio-frequency energy. Specialized tags and careful mounting can address some of these problems, but testing is essential.
Read range is not a fixed specification. GS1 notes that passive UHF RFID can typically operate over several metres, with distances up to 15 metres possible in special cases. Highly sensitive readers using phased-array antennas may achieve longer distances. The usable reading volume, however, depends heavily on antenna directivity, gain, polarization, and tag orientation.
Unwanted reads can occur. Radio signals do not stop neatly at a doorway or conveyor edge. A reader may detect tags outside the intended zone, particularly when antennas are poorly positioned or output power is unnecessarily high.
Software quality remains critical. RFID can capture an identifier, but it cannot correct an inaccurate product database or decide by itself whether an item has been received, shipped, borrowed, or returned.
A barcode system is often cost-effective when operators can easily see and scan each label. RFID becomes attractive when businesses need faster identification of multiple objects, automated reading at fixed points, or less dependence on visual access.
Some operations use both. A logistics tunnel, for example, may combine RFID identification with barcode reading, weighing, and image capture. Each technology provides a different type of evidence, and the application combines the results into one operational record.

A reader demonstration on a clean workbench can be useful, but it is not a deployment test. Real operating conditions introduce variables that a short demonstration may not reveal.
Before selecting equipment, reproduce the actual process as closely as possible:
For a conveyor installation, include the actual conveyor speed and carton spacing. For a library, test books placed close together and returned in mixed orientations. For a tool-management system, test the tags on the tools themselves rather than on a convenient sample card.
The most useful performance measure is not simply the reader’s maximum advertised range. It is the percentage of intended items correctly identified under normal operating conditions, together with the rate of unwanted reads.
That is the practical standard behind what is radio frequency identification rfid technology: a wireless identification method whose business value comes from reliable identification in a real process.
There is no universally best RFID frequency. The correct choice depends on the distance between the reader and the tagged object, the materials around the tag, the number of items to identify, and the required identification workflow.
Low-frequency RFID generally operates at 125 kHz or 134.2 kHz. It is used in applications such as animal identification, industrial access systems, and certain specialized tracking processes.
LF systems are typically designed for relatively short reading distances. Their operating characteristics can make them suitable for applications where a tag is presented close to a reader rather than detected across a large area.
High-frequency RFID commonly operates at 13.56 MHz. It is widely used in contactless cards, ticketing, library systems, and applications based on compatible HF or NFC technologies.
An HF reader designed for a card-presenting workflow is not automatically compatible with a UHF inventory tag. The frequency and communication protocol must match.
Ultra-high-frequency RFID is commonly used for identifying products and assets over longer distances. Passive UHF systems are especially relevant to warehouse, retail, and supply-chain operations because they can identify multiple tags within a reading zone.
The operating band varies by country and regulatory region. Many RAIN RFID deployments use the UHF spectrum around 860–960 MHz, with the permitted channels and power limits depending on local regulations. GS1’s EPC Gen2 standard defines the air-interface requirements for passive UHF RFID systems.
| Selection requirement | LF | HF | UHF |
|---|---|---|---|
| Typical interaction | Close-range identification | Card or item presented near reader | Identification across a defined reading zone |
| Multiple-tag applications | Depends on system design | Supported by some systems | Common in inventory applications |
| Typical use cases | Animal identification, specialized access | Cards, ticketing, library systems | Retail, warehouse, logistics, industrial tracking |
| Main design concern | Reader/tag compatibility | Protocol and card compatibility | Tag orientation, RF environment, regional regulations |
A useful rule is to start with the business process rather than the frequency name. If an operator presents one card at a desk, HF may be appropriate. If cartons move through a receiving portal and need to be identified in groups, passive UHF is often a stronger candidate.
The tag is the part of an RFID system that physically interacts with the object. A tag that performs well on a cardboard carton may not work properly when attached directly to a metal tool or a liquid container.
Choosing by frequency alone is not enough. The tag’s antenna design, dimensions, mounting position, chip sensitivity, memory, and durability all affect its performance.
| Object or material | Tag considerations | Practical advice |
|---|---|---|
| Cardboard cartons | Standard passive UHF label | Test on the actual packaging and in stacked conditions |
| Plastic containers | Label or durable hard tag | Consider cleaning, impact, and reuse requirements |
| Metal tools and equipment | On-metal RFID tag | Use a tag designed for metal mounting; test the installed position |
| Liquid-filled containers | Suitable tag design and placement | Test different mounting positions because liquid can affect UHF performance |
| Clothing and textiles | Textile or laundry RFID tag | Check wash temperature, chemicals, mechanical stress, and service life |
| Access cards | Compatible HF or LF card | Confirm frequency, protocol, and security requirements |
A common deployment mistake is testing a tag before it is attached to the actual object. A standard UHF label may read well when held in open air, then perform poorly when placed directly against a metal surface. For that reason, tag evaluation should use the final mounting method, not just a loose sample.
The amount and type of information depend on the tag chip and its memory design. In a passive UHF system based on EPC Gen2, tag memory may be organized into several banks:
Not every tag provides the same memory capacity or writable areas. Many supply-chain applications use the EPC as the primary identifier and store detailed product information in a database rather than trying to place the entire product record on the tag. This can simplify updates and reduce the amount of data that needs to be written during tag commissioning.
The GS1 EPC/RFID standards cover tag data formats as well as the communication between readers and tags. Using consistent identifiers and data structures can make it easier for different organizations and equipment suppliers to exchange RFID information.
Reader selection should follow the task the equipment needs to perform. A device intended for encoding a small number of tags at a desk has different requirements from a reader installed at a warehouse gate.
Handheld readers are useful when employees need to move around a facility. Typical tasks include stocktaking, locating equipment, checking shelves, and identifying assets that are not passing through a fixed reading point.
Consider:
Fixed readers are suited to controlled reading points, including receiving doors, dispatch lanes, production stations, and conveyor systems.
The selection process should examine:
A fixed reader should be evaluated with the antennas and tags that will actually be installed. A reader’s headline output power does not tell you whether the resulting reading zone will be appropriate for a particular doorway or conveyor.
Desktop reader-writers are used for tag registration, encoding, verification, and other controlled workstation tasks. They are particularly useful when the operator needs to work with a tag at a predictable distance.
Before choosing one, confirm:
For tag issuance, the reading and writing zone should be controlled. If several tags are placed near the desktop device, the operator needs a reliable way to select the intended tag and verify the result.
Antenna installation is not simply a matter of pointing an antenna at the products. The objective is to create a useful reading zone that captures the intended tags and limits unwanted reads.
Start by drawing the physical route of the tagged objects. Identify where they enter, where they should be read, how fast they move, and where they go next.
For a warehouse portal, this means considering the width and height of the opening, pallet dimensions, tag positions, forklift movement, and nearby stock. For a conveyor, consider carton spacing, belt speed, and whether products can rotate or overlap.
A linear antenna can provide effective performance when tag orientation is controlled. A circularly polarized antenna can be useful when tag orientation varies, although the result depends on the tag antenna and installation.
Do not assume that circular polarization will solve every orientation problem. Test the real tags in their expected positions and directions of travel.
Increasing reader output can sometimes improve detection, but it can also expand the reading area and capture tags outside the intended zone.
A more disciplined adjustment sequence is:
GS1 explains that passive UHF read distance depends on the reader’s power and antenna, RF interference, polarization, and tag orientation. It also emphasizes the shape of the readable volume, rather than distance alone.
RFID data usually needs to be processed before it becomes a useful business record. A reader may report the same tag several times while an item remains in its field. The application must decide whether those observations represent one event or several distinct events.
| Stage | System action | Example |
|---|---|---|
| Identification | Reader captures a tag identifier | A carton EPC is detected at receiving |
| Validation | Software checks the identifier | The EPC is matched against an expected shipment |
| Filtering | Repeated or irrelevant observations are handled | Multiple reads during one passage become one event |
| Business processing | The application applies workflow rules | The carton is marked as received |
| Data exchange | The event is shared with other systems | Inventory records are updated in the WMS or ERP |
For UHF RFID deployments, EPC Gen2 defines the air-interface communication between compatible readers and tags. GS1 also provides standards for tag data and reader/application interfaces. LLRP, for example, is designed for communication between reader management software and RFID readers, while ALE addresses the application-level handling of reader events.
These standards do not eliminate the need for software development. The project still needs to define product identifiers, event rules, exception handling, user permissions, and how data is synchronized with the company’s existing systems.
A receiving application, for example, should not mark every detected tag as received automatically. It should check whether the identifier belongs to the expected delivery, whether the transaction is still open, and whether the same event has already been recorded.
Cykeo offers RFID hardware for embedded equipment, fixed industrial installations, and desktop tag-management workflows. The choice depends on whether the project needs a reader module, a fixed reading point, or a controlled workstation for tag encoding.
The following specifications are based on product information supplied for this article. Confirm the current datasheet, firmware version, interface options, and regional configuration before publication or purchase.
For embedded RFID equipment
The CYKEO-M4L combines an analog RF front end with baseband digital signal processing. It is intended for developers integrating UHF RFID functions into custom equipment.
Supplied specifications include:
Potential applications include embedded inventory terminals, automated identification equipment, and custom industrial RFID devices. Throughput should be validated with the intended tag population, RF configuration, and operating environment.
For fixed reading stations
The CYKEO-RA9L / CK-D9L series combines a UHF reader and integrated antenna in an industrial-style enclosure for fixed installations.
Supplied features include:
A 12 dBi variant is also described, with an all-in-one industrial design and full aluminum rear cavity. These products may be evaluated for fixed warehouse, production, and asset-identification points. The final antenna position and reading zone should be validated at the installation site.
For desktop tag registration and encoding
The SSD-D1AL is designed for workstation-based RFID reading and writing, including tag issuance, verification, and controlled encoding tasks.
Supplied specifications include:
Its desktop format can suit workflows where staff need to register or encode tags in a defined area. The actual read and write performance depends on the tag, settings, and working environment.
An RFID project should be evaluated against a measurable operational problem, not simply the number of tags a reader can detect.
For example, a warehouse may want to reduce the time needed to count stock. A manufacturer may need better visibility of work-in-progress. A tool-management operation may want to reduce the time employees spend locating shared equipment.
Each objective needs a different baseline.
| Business objective | Baseline measurement | Possible RFID contribution |
|---|---|---|
| Improve inventory accuracy | Difference between recorded and physical stock | More frequent item identification |
| Reduce stocktaking time | Staff hours per stocktake | Batch identification of tagged items |
| Improve receiving efficiency | Time to verify incoming goods | Automated identification at receiving points |
| Reduce dispatch errors | Incorrect or incomplete shipment records | Additional identification checkpoints |
| Improve asset visibility | Time spent locating equipment | Faster identification and movement recording |
| Strengthen production traceability | Time needed to retrieve process history | Identification at defined production stages |
A useful research reference is the retail field study published by Hardgrave, Aloysius, and Goyal in Production and Operations Management. Its first experiment involved 13 stores over 23 weeks and reported an approximately 26% reduction in inventory record inaccuracy. A second experiment involved 62 stores across five product categories, with results varying by category. These findings demonstrate potential value in a specific retail context; they should not be treated as a guaranteed result for other industries or deployments.
A business can begin with a basic payback model:
Initial costs may include tags, readers, antennas, installation, software, system integration, and testing. Operating costs may include maintenance, replacement tags, support, and software services.
The calculation should use actual operational data. If the main goal is reducing stocktaking labor, record the current time and staffing cost before implementation. If the objective is improving receiving accuracy, measure the existing error rate and the cost of correcting discrepancies.
A small pilot with one clearly defined workflow is often more informative than a large installation based on theoretical read rates.
Radio frequency identification RFID technology is used to identify and track tagged objects through radio-frequency communication. Common applications include retail inventory, warehouse operations, logistics, manufacturing, library management, access systems, and asset tracking. The system can capture identifiers without requiring an operator to scan a visible barcode on every item.
An RFID reader transmits a radio-frequency signal through an antenna. A compatible tag receives the signal and responds with its stored information. Because communication uses radio waves rather than optical scanning, the reader generally does not need a direct visual view of the tag. However, materials such as metal and liquid can still affect performance.
A barcode is normally read optically and usually requires the scanner to see the printed code. RFID uses radio-frequency communication, so compatible tags can often be identified without direct visual contact. Some RFID systems can also identify multiple tags in one reading zone. Barcodes are often simpler and economical for individual scanning tasks, so both technologies may be used in the same operation.
The three commonly used frequency categories are LF, HF, and UHF. LF commonly operates at 125–134.2 kHz, HF at 13.56 MHz, and UHF in regional bands broadly around 860–960 MHz. They differ in communication characteristics, practical read distance, standards, and application suitability.
Yes. Many UHF RFID systems use anti-collision procedures to identify multiple tags within a reading zone. The actual number of tags read successfully depends on the reader, tag design, antenna configuration, tag orientation, RF environment, and speed of movement. A high tag count in a product specification should always be checked against the intended operating conditions.
No. A basic RFID reader can communicate with a local computer or controller without internet access. Larger deployments may use a local network, middleware, or cloud platform to share identification events with warehouse, enterprise, or manufacturing software. The required connectivity depends on the system architecture.
Yes, but standard UHF labels may perform poorly when attached directly to metal or placed close to liquids. On-metal tags, alternative mounting positions, or other tag designs may be required. The best choice should be tested on the actual object under realistic operating conditions.

SSD-A11 UHF RFID antenna features 840–960 MHz adjustable frequency, ≥10.5 dBi gain, circular polarization and 50Ω impedance for fixed RFID systems.

SSD-A09 is a 9 dBi UHF RFID antenna with 840–960 MHz adjustable frequency, circular polarization, 50Ω impedance and directional 60° × 60° coverage.

Explore the SSD-A07 UHF RFID antenna with 7 dBi gain, circular polarization, adjustable 840–960 MHz frequency, and 60°/75° beamwidth for stable RFID read/write performance.

SSD-A06 UHF RFID antenna with circular polarization, adjustable 840–960 MHz frequency, ≥4.5 dBi gain, and a compact directional design for RFID systems.

SSD-R16L Multi-Channel RFID Infrastructure for Automated Inventory Management ✔️ 16-Port High-Density RFID Reading Equipped with 16 SMA antenna ports, SSD-R16L supports multi-antenna deployment for warehouses, retail stores, logistics, production lines, and large-area RFID identification. ✔️ High-Speed & Long-Range Performance With up to 33…

SSD-R8L 8-port UHF RFID reader with 33dBm output, up to 20m reading range and 600+ tags/s recognition. Ideal for warehouse, logistics, retail and asset tracking.

SSD-R4L is a 4-port UHF RFID fixed reader with 33dBm output power, up to 20m reading range, EPC C1G2 support and 600+ tags/s reading speed.

Cykeo CYKEO-A11 UHF RFID reader antenna delivers 11dBi gain, 840-960MHz frequency range, and IP65 ruggedness for retail, logistics, and industrial RFID systems. Features low VSWR and easy installation.

CYKEO Antenna RFID Reader delivers stable long-range UHF performance with a 10.5dBi directional design, built for warehouses, conveyor portals, and industrial RFID systems. This rfid reader antenna provides 20m+ read distance and rugged IP67 protection.

Cykeo CYKEO-PHF3 industrial HF RFID Antenna offers 24-point dynamic tracking, ISO 14443A/15693 protocols, metal-environment stability for archives/libraries/manufacturing.

Cykeo CYKEO-A5B industrial Linear RFID Antenna delivers 5dBi gain, ≤1.5:1 VSWR, and IP65 rugged design for warehouse, production line, and logistics UHF systems.

Cykeo’s CYKEO-B12 Long Range RFID Antenna delivers 15m+ read range with 12dBi gain, IP65 rugged design, and global 840-960MHz UHF support. Ideal for warehouse/logistics asset tracking.

Cykeo CYKEO-B10 Long Distance RFID Antenna offers 10dBi gain, 840-960MHz frequency range, IP65 rating, and 20m+ coverage for logistics/warehousing/ETC systems. Low VSWR ensures stable signal transmission.

Cykeo CYKEO-A6 UHF RFID panel antenna features 6dBi gain, 840-960MHz broadband, IP65 metal-ready housing for logistics/smart retail. 18mm ultra-thin design with tool-free mounting.

Cykeo CK-A3 industrial antenna RFID UHF offers 5m+ tag detection, ≤1.3:1 VSWR, IP65 rugged design, and global UHF spectrum compatibility (840-960MHz) for warehouses, factories, and retail.

Cykeo CYKEO-B5 directional RFID antenna provides 5dBi gain with 60° narrow beamwidth for precise inventory tracking. IP65-rated, global UHF frequency support, and low VSWR.

Create your own high-performance DIY RFID antenna! 5dBi gain, 840-960MHz tunable, step-by-step guides. Compatible with Arduino, Raspberry Pi, and commercial UHF readers.

Cykeo CYKEO-A7 Flexible RFID Antenna features 840-960MHz wideband tuning, 7dBi gain, and IP68 rating for medical/retail/industrial curved surface deployments. 98% read accuracy with peel-and-stick installation.

Cykeo CYKEO-B5A industrial Passive RFID Antenna delivers 5dBi gain, 70° beamwidth, and -40°C~55°C operation for warehouses/smart cabinets. Compatible with Zebra/Impinj readers.

Cykeo’s CYKEO-A9B High Gain RFID Antenna delivers 15m+ read range with 9dBi amplification. Features IP54 rugged design, 840-960MHz bandwidth, and 80° beamwidth for warehouse/manufacturing RFID systems.

Cykeo’s enterprise-grade 8dbi Impinj RFID Antenna 10m+ read range with 840-960MHz tuning. Features IP65 housing, 1.4 VSWR, 35° beamwidth for retail/warehouse RFID systems.

Cykeo CYKEO-A9 industrial UHF RFID antenna delivers 9dBi gain, 840-960MHz frequency range, and IP65 protection for warehouse/logistics/retail RFID systems. Features N-type connector and ≤1.3:1 VSWR.

CYKEO UHF RFID Antenna built for long-distance and industrial applications. This antenna rfid uhf delivers strong gain, outdoor durability, and reliable tag performance in warehouses, yards, and vehicle ID systems.

CYKEO Antenna RFID delivers reliable long-range UHF performance in warehouses, retail shelves, and cold-chain environments. This compact uhf rfid antenna provides stable reads with circular polarization and ultra-wide 840–960 MHz support, ideal for industrial tracking, smart shelves, and asset monitoring.

Cykeo’s CYKEO-C8 UHF RFID antennas delivers 8dBi gain, 840-960MHz full-band coverage, and IP65 ruggedness for manufacturing/warehouse RFID systems. Industrial RFID Antennas Features

Cykeo’s 8dBi UHF RFID antenna and reader kit delivers 10m+ range, 840-960MHz broadband, and IP65 ruggedness for factories, warehouses, and logistics. ISO 18000-6C & EPC Gen2 certified.

Cykeo CYKEO-A9A industrial UHF RFID reader and antenna kit delivers 10m range, 500 tags/sec, IP65 ruggedness for manufacturing/logistics. Supports EPC Gen2, ISO18000-6C.

Cykeo’s CYKEO-A12C UHF Large RFID Antenna delivers 12dBi gain, 840-960MHz global frequency, IP65 ruggedness for logistics/warehousing/automotive. 40° beamwidth ensures stable 15m+ tag reads.

CYKEO Near Field RFID Antenna provides precise 5–30 cm reading for shelves, cabinets, and workstations. This compact rfid shelf antenna delivers stable short-range performance around metal and clutter, ideal for pharmacies, libraries, and electronics sorting.

Cykeo CYKEO-B9 UHF Bluetooth handheld RFID scanner features 12m UHF range, 200+ tags/sec scanning, IP67 rugged design for retail/warehouse/pharma. Supports Android SDK & real-time Bluetooth 5.0 transmission.

Cykeo CYKEO-B4 UHF Handheld RFID Reader scanner delivers 1300 tags/sec reading, 30m UHF range, and 12-hour battery life. IP65 rugged design with barcode/NFC/ID scanning for retail/manufacturing/logistics.

Cykeo CYKEO-B2 industrial UHF RFID handheld Scanner offers 10m range, 500 tags/sec scanning, Android 11 OS, and IP65 rugged design for retail/warehouse/manufacturing.

Cykeo CYKEO-B3 industrial RFID Reader Handheld, terminal offers 2m read range, multi-protocol scanning (NFC/barcode/ID), Android 10 OS, and IP65 ruggedness for logistics/retail/manufacturing.

Cykeo CYKEO-B3L industrial handheld UHF RFID Reader terminal features 20m read range, 500 tags/sec scanning, Android 13 OS, 12-hour battery for logistics/retail/manufacturing. Supports barcode/NFC/ID reading.

Cykeo CYKEO-C1 industrial Forklift RFID Reader features 20m read range, 600 tags/sec scanning, Impinj R2000 chipset, and IP67 rugged design. Ideal for warehouse logistics and manufacturing. Supports ISO 18000-6C/6B protocols.

Cykeo CYKEO-R4 industrial UHF RFID Fixed Reader features 4 TNC ports, 400+ tags/sec speed, IP67 housing, and global frequency compliance for vehicle inspection, smart warehouse, and asset management systems.

Cykeo’s CYKEO-R4L 4-port Fixed UHF RFID Reader delivers 400 tags/sec scanning, ISO 18000-6C compliance, and IP65 protection. Ideal for warehouse automation, manufacturing WIP tracking, and logistics management.

CYKEO CYKEO-R8L Fixed RFID Reader with 8-port UHF design, Impinj-based RF core and up to 20m read range. An industrial Fixed RFID Reader for vehicle inspection, warehouse portals, smart manufacturing lines and secure access checkpoints.

RFID Fixed Reader from CYKEO – the CYKEO-R16L 16-port UHF fixed reader for warehouses, smart cabinets, and production lines. Long-range, multi-tag reading, stable performance for 24/7 industrial use.
Discover why most iPhones can't scan RFID tags natively. See how Cykeo's Bluetooth adapter turns your iPhone into a real RFID scanner for inventory & access control.
MoreLearn how to use RFID reader devices for fast, accurate scanning. Discover setup, operation, and optimization tips for desktop and handheld RFID systems.
MoreLearn how to select the right RFID antenna for warehouse inventory systems. Compare types, range, and installation tips to optimize RFID accuracy and efficiency.
MoreAn RFID chip stands for Radio Frequency Identification chip. It is the electronic component inside an RFID tag that stores identification data and communicat...
More